- TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER HOW TO
- TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER MANUAL
- TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER ARCHIVE
Survey Controller DC File for a kinematic survey collected in a survey controller). Select Import from the left-hand menu/tabs and select the appropriate file format (e.g. If desired, show point names on the map by right-clicking the map screen and selecting Point Labels->Name->OK. If needed, you can change properties such as antenna height here. Double-click on the point to see point properties. Enter a value and click ’OK.’ Your data point will appear on the map. If a projection has not been defined during project surveying, you will be prompted to enter a grid value for your base station (or whatever data point you are importing first). Similarly, data pertaining to different survey points must have different names, or they will be merged. Data pertaining to the same marker should have the same name. site name, antenna type, antenna height, antenna height measurement method) by clicking the box to change and either selecting the correct value from the resulting drop-down menu or enter the correct value by hand. Check that the information shown is correct. Select ’DAT File’ from the left-hand menu, browse for and select your data file, and hit ’Open.’ If you have more than one data file pertaining to your base station, you can select all of them by holding the ’Ctrl’ key, and open them simultaneously.Ī table showing your data file(s) should come up. Select Import from the left-hand menu/tabs. Note that all project properties can be easily adjusted after data import by selecting Projects from the left-hand menu/tab and then selecting Project Properties. If you collected your survey data in a particular coordinate system, click on the Coordinate System tab and change to the coordinate system used in your survey. Click Okay.Ĭhange Project Properties as needed. We recommend processing static and kinematic data separately, even when there is a shared base.
TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER HOW TO
If you collected data using real-time kinematic methods and do not need to post-process it, see our Trimble 4700/5700/R7 - How to execute a real-time kinematic survey from start to finish. TGO can be used to view, process, adjust, and output your survey data into a spreadsheet format.
TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER MANUAL
See the Trimble Geomatics Office User Manual ( v1.6 Rev.A, April 2002. This is an overview of how to use Trimble Geomatics Office (TGO), with limited information on troubleshooting.
TRIMBLE GEOMATICS OFFICE VS TRIMBLE BUSINESS CENTER ARCHIVE
All files in the ZIP archive must belong to the same station.How to process fast-static and post-processing kinematic surveys using Trimble Geomatics Office
If your observation data consists of several files, please compress them to a ZIP archive and upload the zipped file.Data files must contain dual frequency pseudorange and carrier phase observations (L1 and L2).Data files cannot exceed 24 hours in length.For optimal processing results, it is recommended to provide at least 60 minutes of observations.DAT, T01, T02, T04, Quark) and the standard RINEX 2 and RINEX 3 data formats Data formats accepted include Trimble proprietary data formats (e.g.Observation files must meet the following requirements: The CenterPoint RTX post-processing service now supports all dual frequency GNSS receivers.Īntennas must be on the Supported Antennas list.
0 kommentar(er)
